Storage & Shelf Life
Use within 12 months of the manufacture date. Keep the original container cool, dry, and in a climate-controlled location. Best if stored at 70°F with less than 50% relative humidity. Reduced shelf life will occur at higher temperatures. DO NOT FREEZE.
Chemical & Physical Properties
Skin Time | Internal | < 20 minutes @ 70°F / 50% RH |
Tack Free Time | Internal | < 60 minutes @ 70°F / 50% RH |
Cure Rate | Internal | 3-7 Days |
VOC | EPA Method 24 | < 50 g/L, less water & exempt compounds |
Service Temperature | Internal | 0°F – 160°F |
Sag/Slump | ASTM D2202 | < 0.2” |
Staining | ASTM D2203 | None |
Application Temperature | Internal | > 40°F |
Viscosity | RV T-E @ 4 RPM | Approx. 700,000 cP |
Density | Internal | 12.9 lbs./gal (Color) 8.5 lbs./gal (Clear) |
pH | Internal | 7-8 (Color) 8-9 (Clear) |
NOTE: CLEAR SEALANT WILL BE WHITE DURING APPLICATION BUT WILL CLEAR WITHIN 7-14 DAYS.
Directions for Use
Use alcohol to clean all work surfaces of all debris, oil, loose paint, frost, and other contamination. Petroleum-based solvents like mineral spirits and xylene SHOULD NOT BE USED. Prior to application, keep R10 at room temperature for simple gunning and tooling. To guarantee a continuous bead, test and assess. Tooling should be completed within ten minutes of application, if necessary.
