Storage & Shelf Life
Use within 10 months of the manufacture date. Keep the original container cool, dry, and in a climate-controlled location. Best if stored at 70°F with less than 50% relative humidity. Reduced shelf life will occur at higher temperatures and/or higher humidity.
Chemical & Physical Properties
Skin Time | Internal Method | < 20 minutes @ 70°F / 50% RH |
Tack Free Time | Internal Method | < 30 minutes @ 70°F / 50% RH |
Cure Rate | Internal Method | 1/4” Bead in 24 Hours |
VOC | EPA Method 24 | < 34 g/L, less water, & exempt solvents |
Shore A | ASTM C661 | 80 |
Grab Time | Internal Method | 0 Seconds |
Tensile Strength | ASTM D412 | 400 psi |
Sag/Slump | ASTM D2202 | 0” |
UV Rating | ASTM G26 | Do not use in areas subject to UV light |
Service Temperature | Internal Method | -40 – 200°F |
Viscosity | RV T-F @ 4 rpm | Approx. 3,600,000 cP |
Density | Internal Method | Approx. 14.2 lbs./gal |
Directions for Use
Use alcohol to clean all work surfaces of all debris, oil, loose paint, frost, and other contamination. Petroleum-based solvents like mineral spirits and xylene SHOULD NOT BE USED. Prior to application, keep R90+ at room temperature for simple gunning and tooling. To guarantee a continuous bead, test and assess. Tooling should be completed within ten minutes of application, if necessary.
